Version 1.02
Changelog:
Autostart and Manual Start Mission now have a new Animation.
Now the Co-Pilot gets out instead of a rear Crew Member to do the Fire Check of the Engines.
----------------------------------------------------------------------------------------------------------
!!!!! Important !!!!
Requires Dev Version 278 of the H145 BasePack and ActionPack
The HErOMissionPack enables, by using the Missions, playing the HERO App HEMS Operations via the HEMS MissionTablet of the H145 HEMS variant
The HErO app can be found here:
https://de.flightsim.to/file/15617/helicopter-emergency-operations-hero
Please note that the accident Location Mission must be edited to get the coordinates of the HErO App operation into the HEMS Tablet.
A video how to do this (takes only a few seconds and is very easy), can be found here:
For this, the MissionPack and the H145 folders must be in the Community folder, without addon linkers or similar App.
If you don't want this, you can't use the location mission.
The other missions should work if they are copied into the main mission folder of the H145.
I can not offer any help or advice to the Addonlinker or similar apps, because I do not use them.
The MissionPack includes:
--- 48 Airfields or HeliBases(Home Base)(these are the airports in the UK from the HErO app download page on flightsim.to) as single Missions for the HEMS Tablet:
This generated and displayed a Route to a Airfield or HeliBase via the HEMS tablet.
This airport or Helibase can be selected after the patient has been delivered to the hospital..
just make sure that you choose your Start Location.
--- 35 Hospitals(these are the hospitals from the list for LittleNavmap) in the UK as single Missions for the HEMS Tablet:
This generated and displayed a Route to a Hospital via the HEMS tablet.
The HErO App specifies the hospital, to which the patient should be flown.
(Sometimes the patient is also driven to the hospital on the street) With the HERO Hospital folder you can select the appropriate Hospital from the List.
--- Auto/Manual Start Mission with External Check.
Autostart with external check enables an autostart of the engines via the mission menu.
At the same time a crew member will perform an external check of the engines.
Manual Start with external Check will perform an external check of the engines but you must power up the engines yourself.
--- Accident Location Mission in which the Coordinates of the Mission Target can be inserted from the HErO App:
When landing at the accident site, after a short time, the side doors are automatically opened so that the "crew can get out"
and therefore the continuation (opening the side doors to get the Crew out) is triggered in the HErO app.
To do this, after landing, the engines must be shut down to IDLE or completely.
--- Load / UnLoadMission with Animation.
The LoadMission is the continuation of the Accident LocationMission. It is used when the variable time (5-9 minutes) of the HErO app has elapsed
and the request to open the cargo doors to load the patient is received.
Clicking on this mission will start an animation of a crew member getting out,
opening the cargo doors, pulling out the stretcher, walking to a wounded man lying in front of the helicopter,
placing him on the stretcher and returning to the helicopter to load the stretcher with the patient and get back in.
The Unload mission also shows the animations at the hospital, but in reverse, so that the patient is unloaded.
Note that in both of these missions, setting the Engine to IDLE is also a prerequisite for starting the animations.
If, after landing at the scene of the accident, you have shut down the engines completely and now want to use the Autostart/or ManualStart with Check Mission when restarting,
please note that you should only click on this mission before or after the LoadMission. 2 missions can never run at the same time.
So invite first and then StartMission or vice versa.
Of course, if you want to start the heli without the external check, you can do this while the LoadMission is running.
Installation:
Unpack the Thoradan-HErO Mission Pack.RAR file.
Copy the "Thoradan-HErO Mission Pack" folder into your community folder,
then run the "...\Community\hpg-airbus-h145-ap\Update Mission Index.cmd" in the hpg-airbus-h145-ap folder to update the mission list for the tablet.
In the heli itself, press the red refresh button again in the tablet.